Windows NT 4.0 Setup Instructions
Setup Instructions

Choose the topic for your operating system.

Windows 98

Windows 95

Windows* NT* 4.0

Novell NetWare*

Unix* and Others

Make Diskettes

* Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.


Windows* NT* Driver Installation
Windows NT Driver Installation

Experienced Network Administrators:

1	Install the Intel adapter in your server PCI bus.

2	Power on and launch the Network Control Panel

3	Click the Adapters tab and click Add.

4	Insert the Intel CD and click Have Disk

5	Select the Intel adapter on the list that appears and click OK

6	The drivers and the PROSet utility installs.

7	Click close to finish. If you have TCP/IP installed, a configuration window appears.

8	Restart Windows NT when prompted.

Other Users:

Follow the steps in the Installation Guide that came with your adapter.

Other Microsoft Operating Systems and Additional Information:

See the Microsoft readme file for additional installation instructions and adapter configuration information.

  MS.TXT

Windows NT 4.x Unattended Install (PUSH)

See the Microsoft NT PUSH readme file for setup instructions and sample templates.

  NTPUSH.TXT


Novell NetWare* Driver Installation
Novell NetWare Driver Installation

Novell NetWare 5.0 and 4.11

Read the step-by-step adapter installation instructions in the printed Installation Guide included with your adapter.

Novell NetWare 4.10 and Earlier

See the NetWare readme file for installation instructions, sample load commands, and hints and tips.

  NETWARE.TXT

Novell NetWare Client 32 for Windows 95 and DOS/Windows 3.1x

See the NetWare readme file for installation instructions, sample configurations, and hints and tips.

  NETWARE.TXT

Novell NetWare ODI Client Drivers for OS/2 and DOS

See the NetWare readme file for installation instructions, sample configurations, hints and tips, and example files.

  NETWARE.TXT

Novell NetWare Client Services for Windows NT 4.0 Using the ODI Server Driver

See the NetWare readme file for installation instructions.

  NETWARE.TXT


Other Operating Systems
Unix and Other Operating Systems

For Unix, see the Readme file, UNIXINFO.TXT in the \info\general directory on this CD.

  UNIX.TXT

For other operating systems or configurations, see the Readme file, OTHER.TXT in the \info\other directory on this CD.

  OTHER.TXT


Windows 95

Quick Start for Experienced Users

Have your Windows 95 installation CD or diskettes available, since you’ll be prompted for them when you install the new adapter.

With power off, fully insert the adapter in a PCI slot and connect the cable, start Windows 95. You’ll see the New Hardware Found dialog box.

NOTE: If this box does not appear and Windows 95 starts normally, you may need to manually add the adapter. See the MS.TXT readme file in the \MS directory for more information.

Click “Driver from disk provided by hardware manufacturer,” then click OK. You’ll see the Install From Disk dialog box.

Insert the PRO/100+ adapter CD or disk.

Specify D:\ (for a CD-ROM drive) or A:\ (for floppy) as the path, then click OK.

Follow prompts for any Windows 95 installation disks and restart when prompted.

NOTE: If you installed from the CD, the installation files are typically located at D:\Win95, where D is your CD-ROM drive.

After restarting Windows 95, connect to your network by double-clicking the Network Neighborhood icon on the desktop.

Other Users:

Follow the steps in the Installation Guide that came with your adapter.


Windows 98

Quick Start for Experienced Users

1	With power off, fully insert the adapter in a PCI slot and connect the cable, start
Windows 98. You’ll see the New Hardware Found dialog box.

NOTE: If this box does not appear and Windows 98 starts normally, you may need to manually add the adapter. See the section below.

2	When prompted, insert the PRO/100+ adapter CD or disk.

3	Specify D:\ (for a CD-ROM drive) or A:\ (for floppy) as the path, then click OK.

4	Restart the system when prompted.

Manually Installing the Network Drivers

1	After you put the adapter in the computer and connect the cable, start Windows 98.

2	Double-click the System icon in the Control Panel.

3 	Click the Device Manager tab.

4 	Double-click Network Adapters in the list area.

5 	Double-click the Intel PRO/100+ adapter. The Update Device Driver Wizard appears.

6	Select “Search for a better driver than the one your device is using now.”

Make sure the PRO/100+ adapter CD or disk is in the drive, and click Next.

7 	Select the drive that contains the PRO/100+ adapter disk and click Next.

8 	Select “Choose the updated driver (Recommended)” and continue to click Next at each
dialog until the driver files are copied.

9	When Windows has finished copying drivers, click Close and restart your system.

Other Users:

Follow the steps in the Installation Guide that came with your adapter.


Make Diskettes

If you need to use a floppy disk to install the PRO/100+ adapter drivers use MAKEMS.BAT (for Microsoft operating systems) or MAKENW.BAT (for NetWare), located in the \MAKEDISK directory on this CD-ROM. The format for the command is:

D:\MAKEDISK\MAKEMS.BAT D: A:

In the example above, D: is your CD-ROM drive and A: is your floppy drive.

If you need to make a disk for a Unix installation, refer to the following readme file:

  UNIX.TXT