Windows NT 4.0 Setup Instructions
Setup Instructions

Choose the topic for your operating system.

Windows* 2000

Windows 98

Windows 95

Windows NT* 4.0

Novell NetWare*

Unix* and Others

Make Diskettes

•	Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.

Installation and User Guide

User documentation is located in the \MANUALS directory. This is in Adobe Acrobat format, which requires the Acrobat Reader. If you do not have this on your computer, use the installer program in the \ACROBAT directory.


Windows* NT* Driver Installation
Windows NT Driver Installation

Experienced Network Administrators:

1	Install the Intel adapter in your server PCI bus. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed.

2	Power on and launch the Network Control Panel.

3	Click the Adapters tab and click Add.

4	Insert the Intel CD and click Have Disk.

5	Select the Intel adapter on the list that appears and click OK.

6	The drivers and the PROSet utility installs.

7	Click close to finish. If you have TCP/IP installed, a configuration window appears.

8	Restart Windows NT when prompted.

Other Users:

Follow the steps in the Installation Guide in the \MANUALS directory.

Other Microsoft Operating Systems and Additional Information:

See the Microsoft readme file for additional installation instructions and adapter configuration information.

  MS.TXT

Windows NT 4.0 Unattended Install (PUSH)

See the Microsoft NT PUSH readme file for setup instructions and sample templates.

  NTPUSH.TXT


Novell NetWare* Driver Installation
Novell NetWare Driver Installation

Novell NetWare 5.x and 4.2

Read the step-by-step adapter installation instructions in the printed Installation Guide included with your adapter. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed.

Novell NetWare 3.2

See the NetWare readme file for installation instructions, sample load commands, and hints and tips.

  NETWARE.TXT

Novell NetWare Client 32 for Windows 95 and DOS/Windows 3.1

See the NetWare readme file for installation instructions, sample configurations, and hints and tips.

  NETWARE.TXT

Novell NetWare ODI Client Drivers for OS/2 and DOS

See the NetWare readme file for installation instructions, sample configurations, hints and tips, and example files.

  NETWARE.TXT

Novell NetWare Client Services for Windows NT 4.0 Using the NDIS Server Driver

See the NetWare readme file for installation instructions.

  NETWARE.TXT


Other Operating Systems
Unix and Other Operating Systems

For Unix, see the readme file appropriate for your operating system. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed.

  SCO OpenServer

  SCO UnixWare 2.1.x

  SCO UnixWare 7.x (DDI 7 driver)

  SCO UnixWare 7.x (DDI 8 driver)

For other operating systems or configurations, see the readme file OTHER.TXT.

  OTHER.TXT


Windows 95

Quick Start for Experienced Users

Have your Windows 95 installation CD or diskettes available, since you’ll be prompted for them when you install the new adapter. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed.

With power off, fully insert the adapter in a PCI slot and connect the cable, start Windows 95. You’ll see the New Hardware Found dialog box.

NOTE: 	If this box does not appear and Windows 95 starts normally, you may need to manually add the adapter. See the MS.TXT readme file in the \MS directory for more information.

Click “Driver from disk provided by hardware manufacturer,” then click OK. You’ll see the Install From Disk dialog box.

Insert the Intel adapter CD.

When prompted for the location of the Intel adapter CD or device driver, specify D:\ (or the appropriate drive letter for the CD-ROM drive) as the path, then click OK.

Follow prompts for any Windows 95 installation disks and restart when prompted.

NOTE: 	If you installed Windows from the CD, the installation files are typically located at D:\Win95, where D is your CD-ROM drive.

After restarting Windows 95, connect to your network by double-clicking the Network Neighborhood icon on the desktop.

Other Users:

For instructions on manually installing an adapter, follow the steps in the \INFO\MS.TXT readme file located on the Intel adapter CD.


Windows 98

Quick Start for Experienced Users

1	With power off, fully insert the adapter in a PCI slot and connect the cable. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed. Then start Windows 98. You’ll see the New Hardware Found dialog box.

NOTE: 	If this box does not appear and Windows 98 starts normally, you may need to manually add the adapter. See the section below.

2	When prompted, insert the Intel adapter CD or disk.  (If the Intel Product Setup screen appears, close it to continue.)

3	When prompted for the location of the Intel adapter CD or device driver, specify D:\ (or the appropriate drive letter for the CD-ROM drive) as the path, then click OK.

4	Restart the system when prompted.

Manually Adding the Network Drivers

If the New Hardware Found dialog box does not appear at startup and you cannot connect to the network, check the Device Manager list to see if the new adapter is present. If it is not, follow these steps:

1	From the Control Panel, double-click the System icon.

2	Click the Device Manager tab.

3	Double-click Other Devices or Network Adapters in the list area.

4	Double-click a PCI Ethernet Controller.

5	Click the Driver tab, then click Update Driver.

6	Click Next at the Update Device Driver Wizard.

7	Select "Display a list of all the drivers..." and click Next.

8	Insert the Intel adapter disk and click Have Disk.

9	Enter the appropriate drive for your disk media (A:, D:, etc.), and click OK.

10	Click OK at the Select Device dialog box.

11	The Update Wizard displays the message that it has found the driver. Click Next.

12	Click Finish.

13	Restart your computer when prompted.


Windows 2000

Install Network Drivers from Disk

With power off, fully insert the adapter in a PCI slot and connect the cable. If your computer has a LAN-on-Motherboard (LOM) product, the adapter is already installed. After you put the adapter in the computer, connect the cable, plug in the power cord and start your computer, Windows automatically installs a driver for the adapter from its own library of drivers.

However, you should still install the driver that is included on the Intel adapter CD to ensure you have the complete set of features.  You can install this driver manually using the following instructions.

To update the driver for the adapter:

1	Insert the Intel adapter CD in the CD-ROM drive.

2	From the Control Panel, double-click the System icon, select the Hardware tab, and click the Device Manager button.

3	Select “Network Adapters” and right-click on the adapter listing to display its menu.  Then click the Properties menu option.

4	From the Properties dialog box, click the Driver tab and click the Update Driver button.  The Update Device Driver Wizard appears.  Click Next.

5	At the prompt “What do you want the wizard to do?”, select the “Search for a suitable driver for my device” radio button, and click Next.

6	Select the CD-ROM drives check box and click Next.

7	Select the “Install one of the other drivers” check box and click Next.

8	Restart your computer.

After restarting your computer, connect to your network by double-clicking the My Network Places icon on the desktop.


Make Diskettes

If you need to use a floppy disk to install the adapter drivers in NetWare or Windows, use the MAKEDISK.BAT utility located in the \MAKEDISK directory on this CD-ROM.

MAKEDISK [operating system] [destination]

where [operating system] is the OS for which you are creating the diskette, and [destination] is the drive letter and path (such as A:).

The possible [operating system] options are:

W2K = Microsoft Windows 2000

NT  = Microsoft Windows NT

W95 = Microsoft Windows 95

W98 = Microsoft Windows 98

NW  = Novell NetWare servers and clients

DOS = Microsoft DOS, Windows 3.1 and IBM OS2

Make sure you have a 1.44 MB formatted, non-bootable diskette in the floppy drive when using this utility.

NOTE: This utility MUST be run from the \MAKEDISK directory.